|
Like other portable consumer electronic devices digital cameras use batteries as their power source. In this article we will describe different battery technologies and their cons and pros. Armed with this knowledge you will be able to take into consideration the battery used when purchasing your next camera.
A camera usually supports just one type of battery either a disposable battery or a rechargeable one. The exception is cameras that are powered by standard AA, AAA or similar batteries. In most of these cases disposable and rechargeable batteries can be used interchangeably.
There are two battery types:
-
disposable batteries: can only be used once. They usually have a standard size and shape such as AA, AAA and so on. You can buy these batteries at most stores and once they are empty you simply dispose them (please help keep the environment safe and clean by disposing batteries only to special battery disposal containers).
-
rechargeable batteries: can be used multiple times. Some rechargeable batteries have a standard size and shape such as AA, AAA and so on. Such standard size batteries can be used anywhere that a disposable battery can. More often than not however rechargeable batteries have a proprietary shape and are compatible with just a few specific cameras. Once a rechargeable battery is empty you can place it in a special charger that will recharge it. The time it takes to recharge a battery, the number of times it can be charged and the life time of the battery are dependant on the technology used to build the battery.
There are pros and cons to using disposable or rechargeable batteries. The main advantage to using a disposable battery is that you can always buy a few to have with you to replace the ones that are empty and you can always get one in a store close-by in case you are stuck with empty batteries. The disadvantages to using disposable batteries are the cost of buying new batteries every times your batteries are empty, the capacity (in most cases a disposable battery will not last as long as a good rechargeable battery). On the other hand rechargeable batteries require only one purchase. When the battery is empty you can simply place it in its charger and after an hour or so you will have a fully recharged battery. The disadvantage is that if you run out of batteries during a photo shooting session or somewhere away from home or a power supply you can not just buy another battery. The solution to that problem is to buy one extra battery and to always carry it with you fully charged.
If your camera uses standard size batteries such as AA or AAA you can have the advantages of both disposable and rechargeable batteries. You can always use disposable AA or AAA batteries with the camera but you can also get a rechargeable AA or AAA battery and use it when convenient.
Rechargeable batteries technologies:
Different technologies are used in building rechargeable batteries. Look at the battery itself to find out what technology was used in most cases it will be written on a small sticker on the battery or somewhere on its packaging. The following are the most common technologies and some of their pros and cons:
-
nickel cadium: one of the oldest technologies. These batteries are inexpensive, they can be recharged fast and many times before they lose their capacity. On the downside they have a low capacity and have a “memory effect” – a “memory effect” means that the battery can not be recharged to its full capacity unless it is first fully discharged. This can be problem since in most cases you will want to make sure your battery regardless of its current state is fully charged before going on a photo shooting session. Some charges solve this problem by first discharging the battery and only then recharging it to its full capacity.
In conclusion when choosing a camera and considering what batteries it uses you should first make a choice between disposable and rechargeable batteries. If you choose to get a camera that uses rechargeable batteries you should try to choose a battery that uses the latest technologies like polymer or lithium unless you have some special considerations. |
